Pipette Filling Device E-fill
Product Code : JA-BTD-3334
The Pipette Filling Device E-fill (SKU JA-BTD-3334), supplied by JaincoLab, is a battery-operated pipette controller that fills and empties glass or plastic pipettes up to 100 ml without mouth pipetting. Its pump speed can be adjusted continuously during use, and Ni-MH 3.6 V rechargeable batteries with a low-power circuit give about eight hours of continuous operation. This rechargeable pipette filler has a universal silicone collet and an in-line membrane filter to keep liquid and aerosols out.
Specifications
The E-fill pipette filler is specified by Ni-MH 3.6 V rechargeable batteries, about 8 hours of continuous operation, a vacuum and pressure pump with adjustable speed, a universal silicone collet for pipettes up to 100 ml and a 0.2 in-line membrane filter.
| Product | Pipette Filling Device E-fill |
| SKU | JA-BTD-3334 |
| Power | Ni-MH 3.6 V rechargeable batteries; battery charger supplied |
| Operating time | About 8 hours of continuous operation |
| Pump | Vacuum / pressure pump; speed continuously adjustable during operation |
| Pipette holder | Universal silicone collet with internal knurling, pipettes up to 100 ml |
| Filter | In-line membrane filter (0.2) |
| Indicators | Two LEDs: red for low charge, green for charging status |
| Grip | Comfortable grip; colour combinations |
Applications of the rechargeable pipette filler
The filler is used for measured transfers with graduated and volumetric pipettes, replacing rubber bulbs and mouth pipetting in teaching and routine laboratories.
- Filling and dispensing graduated and volumetric pipettes up to 100 ml
- Titration and solution preparation in chemistry labs
- Microbiology and cell-culture work with serological pipettes
- Student practicals where mouth pipetting is not allowed
Scope of supply and ordering
The listing covers the Pipette Filling Device E-fill with rechargeable batteries and battery charger. Spare filters and colour choice are confirmed on the quotation.
Frequently asked questions
How long does a charge last?
About eight hours of continuous operation on the Ni-MH 3.6 V batteries.
Which pipettes does it take?
Standard pipettes up to 100 ml, held in a universal silicone collet.
How is the device protected from liquid?
An in-line 0.2 membrane filter stops liquid and aerosols from entering the device.
Related products
- Electronic Micro pipettes
- Single Channel Micro pipette
- UT Bottle Top Dispenser
- Stands for Micro pipettes
See the full bottle top dispenser and pipette range from JaincoLab for dispensers, pipette fillers and micropipettes.
Request a quote
For a quotation on the Pipette Filling Device E-fill, send the volume range or model, the quantity and the delivery destination through the JaincoLab contact page or email [email protected] with SKU JA-BTD-3334. Buying under a laboratory tender? Use our tenders page.
