Automatic Mounting Press
Product Code : JA-ME-7355
The Automatic Mounting Press (SKU JA-ME-7355), supplied by JaincoLab, mounts metallographic specimens in resin with the whole cycle of preheating, heating, pressing and cooling run by a microcomputer. Pressure, temperature and heating and cooling times are set on a large touch screen, and forced water cooling shortens the cycle. This automatic metallographic mounting press can prepare two samples at a time and takes moulds of 25, 30, 40 or 50 mm diameter.
Specifications
The automatic metallographic mounting press is specified by a mounting temperature of 50 to 300 °C, 1000 W heating on 220 V, a pressure range of 0 to 2 MPa (0 to 72 MPa on the product) and a shortest mounting time of 15 minutes, as listed in the table.
| Product | Automatic Mounting Press |
| SKU | JA-ME-7355 |
| Control | Microcomputer; touch screen LCD with graphical HMI |
| Pressure | 0 to 2 MPa; product pressure 0 to 72 MPa |
| Mounting temperature | 50 to 300 °C |
| Heating power | 1000 W |
| Voltage | 220 V |
| Mould diameters | 25, 30, 40, 50 mm (two sizes selected) |
| Cooling | Forced water cooling |
| Shortest mounting time | 15 minutes |
| Capacity | Two samples at a time |
| Weight | 120 kg |
| Dimensions | 630 x 520 x 520 mm |
Applications of the automatic metallographic mounting press
The press is used where many specimens must be mounted to a repeatable routine, since the programmed cycle gives the same pressure, temperature and cooling for every mount without an operator standing by.
- Metallography and material science labs in engineering colleges
- Research laboratories preparing many specimens
- Industrial quality-control labs for steels and alloys
- Mounting two specimens at once for comparison
Scope of supply and ordering
The listing covers the Automatic Mounting Press with touch screen control and water cooling; two mould sizes are selected from 25, 30, 40 and 50 mm.
Frequently asked questions
Which mould sizes are available?
25, 30, 40 and 50 mm; two sizes are selected for the unit and can be changed easily.
How is the cycle controlled?
By a microcomputer; pressure, temperature and heating and cooling times are set on a touch screen.
How long does a mount take?
The shortest mounting time is 15 minutes, helped by forced water cooling.
Related products
- Semi Automatic Mounting Press
- Disc Polishing Machine
- Polishing Consumables
- Brinell Hardness Tester For Metallurgy
Browse the full metallurgical equipment range from JaincoLab for grinding, polishing and hardness testing.
Request a quote
To receive a quotation for the Automatic Mounting Press, send the quantity, the variant you need and the delivery destination through the JaincoLab contact page or email [email protected], quoting SKU JA-ME-7355. Institutions and contractors buying under a tender can also reach us via the tenders page.
