• +91-85699-09696

Solar Energy Hot Water System Trainer

Solar Energy Hot Water System Trainer

Product Code : JA-LABCS-9622

The Solar Energy Hot Water System Trainer is modelled on the solar water heaters in common use in homes and commercial buildings. A solar collector heats water in a storage tank that is integral with the unit, and the tank also carries a supplementary electric heater. Students follow how the water heats, circulates and holds its heat.

Specifications of the solar hot water system trainer

Product codeJA-LABCS-9622
System typeSolar hot water heater with an integral storage tank, modelled on residential and commercial heaters
CirculationNatural (thermosiphon) circulation between the collector and the tank, with no pump
CollectorSolar collector that heats the water for the integral storage tank
Storage tankInsulated hot water tank mounted above the collector as part of the unit, fitted with the electric backup heater
Electric backup heater500 W immersion heater for 230 V AC, 50 Hz, thermostat-controlled, with an independent high-limit cut-off and low-water protection*
Temperature measurementSeveral temperature sensors, including points at different heights in the tank and at the collector inlet and outlet
Light sourceWorks in sunlight
FrameFree-standing metal frame with adjustable collector tilt
Typical exercisesThe thermosiphon heating cycle, tank temperature at different heights over time, temperature rise across the collector and the effect of the electric heater
ManufacturerJaincoLab, Ambala, India

* Standard JaincoLab specification for new builds.

Experiments on the solar hot water system trainer

  • Thermosiphon cycle. Expose the collector to the light and watch the collector outlet warm up first, followed by the top of the tank. Log the sensor readings with a Multi-Thermometer to see the warm water rise.
  • Temperature layers. Read the tank sensors at each height at regular intervals, timed with a Digital Stop Watch. Plot temperature against time for every height on one graph.
  • Electric boost. Switch on the supplementary heater with the light off and compare the tank temperature pattern with the solar run.
  • Two system designs. Compare the trainer with the Solar Energy Trainer, Boiler Type, where a pump moves the water to a separate boiler.

Frequently Asked Questions

Why must the storage tank sit above the collector in a thermosiphon system?
Water warmed in the collector becomes lighter and rises into the tank, while cooler water sinks back down to the collector. This flow works only if the tank is higher than the collector. With the tank too low, the flow can run backwards at night and cool the stored water.

How does an integral-tank solar heater differ from a split system with a pump?
In an integral-tank heater, the tank sits on the same unit as the collector and the water circulates by itself, with no pump or controller. A split system places the tank elsewhere, often indoors, so it needs a pump and a controller. The boiler-type trainer in this range shows the split design.

What can stop the water circulating in a thermosiphon loop during a test?
Air trapped at a high point is the usual cause, since a bubble breaks the loop. Pipes that are too narrow, that dip downwards along the way, or a tank set too low also slow the flow. Fill the system slowly and vent the air before starting a run.

How is the electric backup heater in the tank rated and controlled?
It is a 500 W immersion heater for 230 V AC, 50 Hz, and on its own it draws about 2.17 A. A thermostat switches it, an independent high-limit cut-off guards against overheating and low-water protection stops it running dry. Use it for runs on dull days or to compare electric boost with solar heating.

Does the electric heater change the import heading of a solar hot water trainer?
Not usually on its own. A solar water heater with an electric backup element is generally classified under HS subheading 8419.12. Apparatus made only for demonstration in teaching, and unsuitable for other uses, falls under heading 9023 instead. The importer's customs broker fixes the final line for each country.

Is the trainer supplied as one assembled unit or as a separate collector and tank?
The storage tank is integral with the collector, so the two form one unit. Say in your enquiry whether you want the frame sent assembled or ready for site assembly. JaincoLab service engineers can install the trainer at your site and hand it over in working order.

Other solar energy trainers in the range

JaincoLab specialises in turnkey laboratory projects funded by education ministries, the World Bank and United Nations programmes, manufacturing and exporting the equipment and executing these projects successfully in many countries. Tender bidders can send their requirement list through our tenders page for a line-by-line quotation.

See the Renewable Energy Equipment range and more physics apparatus from JaincoLab, a physics lab equipment manufacturer in India.

For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.

Last updated: 20 November 2026

   
Supply of Solar Energy Hot Water System Trainer from to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]

+91-85699-09696

Follow Us