Renewable Energy Equipment Manufacturer, Suppliers and Exporter in India
Jaincolab Manufacturers is leading Renewable Energy Equipment Manufacturer,and supplier and Exporter in India, Algeria (Algiers), Angola (Luanda), Argentina (Buenos Aires), Armenia (Yerevan), Australia(Canberra), Austria (Vienna), Bahrain (Manama), Bangladesh (Dhaka), Bhutan (Thimphu), Bolivia (Sucre), Botswana (Gaborone), Brazil (Brasília), Brunei (Bandar Seri Begawan), Montenegro (Podgorica), Morocco (Rabat), Mozambique (Maputo), Myanmar (Naypyidaw), Namibia (Windhoek), Nepal (Kathmandu), New Zealand (Wellington), Nigeria (Abuja), Oman (Muscat), Palestine (Ramallah), Panama (Panama City), Papua New Guinea (Port Moresby), Paraguay (Asunción), Peru (Lima), Philippines (Manila)¸ Portugal (Lisbon), Qatar (Doha), Rwanda (Kigali), Saudi Arabia (Riyadh), Senegal (Dakar), Serbia (Belgrade), Sierra Leone (Freetown), Slovakia (Bratislava), South Africa (Cape Town) (Pretoria) (Bloemfontein), South Sudan (Juba), Spain (Madrid), Sri Lanka (Sri Jayawardenepura Kotte) (Colombo), Sudan (Khartoum), Syria (Damascus), Tanzania (Dodoma), Thailand (Bangkok), Togo (Lomé), Tonga (Nuku'alofa), Trinidad and Tobago (Port of Spain), Tunisia (Tunis), Turkey (Ankara), Turkmenistan (Ashgabat), Uganda (Kampala), United Arab Emirates (Abu Dhabi), United Kingdom (London), United States (Washington, D.C.)
Which renewable energy trainers are in this range?
This range has five items for renewable energy and energy-saving lessons. Four are solar trainers. A solar electric demonstrator has a PV module, battery and inverter, and a compact trainer measures solar heat. Two solar hot water trainers use a pump and an insulated store, or a thermosiphon tank. The fifth is the Energy Saving Experiment Kit, Ready to Use, with meters and sensors in a fitted case.
- Solar Energy Demonstrator (JA-LABCS-9623)
- Solar Heat Energy Trainer (JA-LABCS-9620)
- Solar Energy Trainer, Boiler Type (JA-LABCS-9621)
- Solar Energy Hot Water System Trainer (JA-LABCS-9622)
- Energy Saving Experiment Kit, Ready to Use (JA-REE-7699)
Solar and energy-saving trainers in the range
| Group | Items | What it covers |
|---|---|---|
| Solar electricity | Solar Energy Demonstrator (JA-LABCS-9623) | A 30 Wp, 12 V PV module, a 10 A charge controller, a 12 V, 12 Ah sealed AGM battery and a 150 W pure sine inverter, with DC and AC loads and voltage, current and power readings |
| Solar heat | Solar Heat Energy Trainer (JA-LABCS-9620) | A small flat plate collector, with water temperatures at the inlet and outlet, for the heat absorbed in kcal or BTU and the collector efficiency |
| Solar hot water systems | Solar Energy Trainer, Boiler Type (JA-LABCS-9621); Solar Energy Hot Water System Trainer (JA-LABCS-9622) | Forced-circulation and thermosiphon water heaters with hot water storage, a 500 W electric heater and temperature sensors |
| Energy saving | Energy Saving Experiment Kit, Ready to Use (JA-REE-7699) | A fitted case with a base station, temperature and humidity sensors, a carbon dioxide station, a luxmeter, an infrared thermometer, a water flowmeter and two energy meters, for energy and water audits |
Solar heat and solar hot water trainers compared
Each row gives the values on that trainer's own page. The backup heater details of the integral-tank trainer are the standard JaincoLab specification for new builds.
| Product | Product code | System | Collector | Water circuit and storage | Measurements | Exercises |
|---|---|---|---|---|---|---|
| Solar Heat Energy Trainer | JA-LABCS-9620 | Compact solar heat trainer for classroom and remote-site use | Small flat plate collector: black metal absorber, glass cover and insulated back; about 320 x 330 mm to 300 x 400 mm; adjustable tilt | Water flows through the collector; the outflow is collected and weighed for the mass flow | Water temperature at the collector inlet and outlet | Heat absorbed from flow in kcal or BTU, specific heat and temperature rise, collector efficiency and heat losses |
| Solar Energy Trainer, Boiler Type | JA-LABCS-9621 | Closed-loop solar thermal trainer for solar hot water heating, as used in homes and commercial buildings | Flat plate collector, 0.5 m² aperture | Pump circulation in the collector loop; insulated 15 L hot-water store, a training reservoir and not a pressure boiler, with a 500 W electric heater; thermostatic control and over-temperature protection | Temperature and flow sensors with a readout | Heat collected in the store, inlet and outlet temperatures with the flow, sensor check, electric heater power |
| Solar Energy Hot Water System Trainer | JA-LABCS-9622 | Solar water heater with an integral storage tank, modelled on residential and commercial heaters | Solar collector with adjustable tilt on a free-standing metal frame | Natural (thermosiphon) circulation with no pump; insulated tank above the collector, with a 500 W electric backup heater for 230 V AC, 50 Hz, thermostat-controlled, with a high-limit cut-off and low-water protection | Several sensors, at different heights in the tank and at the collector inlet and outlet | Thermosiphon cycle, tank temperature at different heights over time, temperature rise across the collector, effect of the electric heater |
Solar electric demonstrator
| Product | Product code | Solar module | Storage and control | Inverter and loads | Meters and light source | Exercises |
|---|---|---|---|---|---|---|
| Solar Energy Demonstrator | JA-LABCS-9623 | 30 Wp nominal, 12 V module, rated at standard test conditions, on a panel stand | 10 A charge controller; 12 V, 12 Ah sealed AGM battery, fused | 150 W pure sine inverter, with the output voltage and frequency to suit the destination; DC and AC lamps or resistive loads | Voltage, current and power readings; guarded terminals and a user guide; sunlight as the light source; irradiance meter as an option | Power at each stage from panel to AC lamp, panel tilt and light level, battery charging record, one cell compared with the panel |
Energy saving experiment kit
Values are taken from its product page. The contents and the case size are the standard JaincoLab specification for new builds.
| Product | Product code | Instruments | Batteries and case | Student measurements | Topics covered |
|---|---|---|---|---|---|
| Energy Saving Experiment Kit, Ready to Use | JA-REE-7699 | Base station with four temperature and humidity sensors; carbon dioxide measuring station with adapter and SD card; SD card reader; luxmeter; infrared thermometer; water flowmeter; two energy meters | Eleven AA cells; fitted case with inserts, transport size about 600 x 400 x 250 mm | Room temperature and humidity, carbon dioxide, light levels, surface temperatures, water flow and electricity use | Energy use, wastage and saving; household and global energy consumption; climate change; ecological impact of energy choices |
How to choose a renewable energy trainer
- To teach solar electricity, choose the Solar Energy Demonstrator (JA-LABCS-9623). Students follow the energy from the PV module through the charge controller and battery to a 150 W pure sine inverter. Voltage, current and power readings show each stage.
- To measure the heat a collector absorbs, choose the Solar Heat Energy Trainer (JA-LABCS-9620). It is small and compact, and students work out the heat in kcal or BTU from the inlet and outlet water temperatures.
- To show a complete solar hot water system, choose forced or natural circulation. The Boiler Type trainer (JA-LABCS-9621) uses a pump and an insulated 15 L store with a 500 W electric heater. The Hot Water System Trainer (JA-LABCS-9622) uses thermosiphon flow into a tank above the collector.
- Plan the light source and the mains. The trainers work in sunlight, and the Solar Heat Energy Trainer page also describes lamp tests indoors. The boiler-type trainer needs 230 V AC, 50 Hz for its pump, controls and heater, and the integral-tank trainer for its 500 W backup heater.
- For lessons on everyday energy use, choose the Energy Saving Experiment Kit, Ready to Use (JA-REE-7699). Students log temperature and humidity, carbon dioxide, light levels, water flow and electricity use. They then link household use with global energy consumption and climate change.
Practicals covered by these trainers
| Task | Products used |
|---|---|
| Reading the voltage, current and power of the panel, the battery and the load | Solar Energy Demonstrator |
| Charging a battery and running DC and AC loads through an inverter | Solar Energy Demonstrator |
| Working out the heat absorbed in kcal or BTU and the collector efficiency | Solar Heat Energy Trainer |
| Changing the collector tilt and comparing the heat or current collected | Solar Heat Energy Trainer, Solar Energy Hot Water System Trainer or Solar Energy Demonstrator |
| Following the thermosiphon cycle and the tank temperature at different heights | Solar Energy Hot Water System Trainer |
| Logging the heat collected in the store, and measuring the electric heater power | Solar Energy Trainer, Boiler Type |
| Running lighting and standby power audits, and logging carbon dioxide in a closed classroom, to see where energy is wasted | Energy Saving Experiment Kit, Ready to Use |
Who uses these trainers
Physics and environmental science teachers in schools use these items for energy lessons. Renewable energy courses in polytechnics, ITIs and colleges use the solar trainers for practical work. The solar heat trainer is also made for remote-site use.
Ordering renewable energy trainers
Quote the product code of each item. For the demonstrator, give the mains voltage and frequency of your country, so the inverter output can be set to match. Say also whether you need the optional irradiance meter. The boiler-type trainer and the heater of the integral-tank trainer need a 230 V AC, 50 Hz supply. For the integral-tank trainer, say whether the frame should arrive assembled or ready for site assembly. All five items are manufactured by JaincoLab in Ambala, India. Send the list through our contact page.
Other physics ranges for energy and heat lessons
Renewable energy trainers are part of the Physics Lab Equipment range from JaincoLab, a physics lab equipment manufacturer in India.
| Range | What it covers |
|---|---|
| Energy Transfer Equipment | Motor generators, water turbine and dynamo models, demountable transformer kits, coils and a mounted solar cell |
| Heat | Calorimeters, Boyle's law apparatus, thermal conductivity sets, a bimetallic strip and a solar oven |
| Electricity Equipment | Circuit kits, rheostats, resistance wire, battery holders and leads, and a solar cell unit |
| Electromagnetism Equipment | Electromagnet kits, induced current and Lenz's law apparatus, an Oersted apparatus and a force on a conductor apparatus |
| Light And Optics Equipment | Lenses, prisms, optical benches, spectroscopes, ray boxes and a light energy kit |
| Measurement | Mass sets, balances, ammeters, galvanometers, joulemeters, micrometers and power supplies |
| Atomic Physics Equipment | Geiger counters, cloud chambers, electron tubes, and Planck constant and Millikan apparatus |
| Force Motion And Dynamic Equipment | Dynamics trolleys, air tracks, force tables, pulleys, levers and Hooke's law apparatus |
| Mechanics Lab Equipment | Density sets, Archimedes principle kits, spring balances, mass sets and a ballistic pendulum |
| Sound and Waves | Tuning forks, sonometers, ripple tanks, slinky springs, a bell in vacuum and a microwave transmitter and receiver |
| Electrostatics Equipment | A Graaff generator and accessories, electroscopes, friction rods and cloths, Faraday pails and a parallel plate capacitor |
| Magnetisms | Bar and floating magnets, magnetising coils, magnetism kits and metal test sets |
| Density Equipment | Density cubes in metals, wood, plastic and stone, and metal cylinder sets |
| Education Kit | CAPS science and technology kits, and circuit board, optics, dynamics, electricity and solar energy kits |
| AP Physics | A physics lab and light waves kit and a physics measurement kit |
Frequently Asked Questions
What is the difference between a solar thermal trainer and a solar PV trainer?
A solar thermal trainer turns sunlight into heat in a collector and stores it as hot water. A solar PV trainer turns sunlight into electricity in solar cells, stores it in a battery and can convert it to AC. In this range the solar heat and hot water trainers are thermal, and the Solar Energy Demonstrator is PV.
Which energy changes can students follow on the solar trainers?
On the collectors, light energy becomes heat in the absorber and then thermal energy stored in the water. On the demonstrator, light becomes electrical energy in the module and chemical energy in the battery. The inverter turns it back into AC electrical energy, which ends as light and heat in the lamps. Students can measure each stage and see where energy is lost.
Why does the power from a solar panel depend on the load connected to it?
Power is voltage times current. With no load the panel gives its open-circuit voltage but no current. On a short circuit it gives current but almost no voltage. Both give zero power. In between, one load gives the most power. Students can see this by reading the panel voltage, current and power with different loads.
What safety checks should staff make before a solar trainer practical?
Collector pipes and stored water can get hot enough to scald, so let them cool before anyone drains or moves a unit. Never bypass the thermostat or the over-temperature protection on either hot water trainer. Switch off the 230 V supply before touching pump or heater wiring, and keep battery terminals covered on the demonstrator.
Which items in this range include batteries?
The Solar Energy Demonstrator has a fused 12 V, 12 Ah sealed AGM battery. It is charged from the 30 Wp module through a 10 A charge controller. The Energy Saving Experiment Kit, Ready to Use comes with eleven AA cells. The solar heat and hot water trainers store energy as hot water and have no battery. Ask for each battery to be listed as its own quotation line.
Which items should a tender for a solar energy lab list?
For PV work, list the module, charge controller, battery, inverter, loads and meters. For solar heat, list the collector, the hot-water store or integral tank, the electric heater, and the temperature and flow sensors. Name the trainers by product code and send the list through our tenders page.
For a quotation, list the trainers with their product codes and the number of sets you need, and send it through our contact page. For tender or project supply, see our tenders page.
Energy Saving Experiment Kit, Ready to Use
Product Code : JA-REE-7699
Ready-to-use energy saving experiment kit in a fitted case: base station with four temperature and humidity sensors, carbon dioxide station with SD card, SD reader, luxmeter, infrared thermometer, water flowmeter, two energy meters, eleven AA cells.
Note: Energy saving experiment kit for school energy audits, manufactured by JaincoLab.
View Details
Solar Heat Energy Trainer
Product Code : JA-LABCS-9620
Compact solar heat trainer for classroom and remote-site use. Students measure the heat a solar panel absorbs in kcal or BTU with a small flat plate collector. They then study collector angle, light intensity and efficiency.
Note: Compact solar heat absorption trainer for kcal or BTU measurement, manufactured by JaincoLab.
View Details
Solar Energy Trainer, Boiler Type
Product Code : JA-LABCS-9621
Closed-loop solar thermal trainer: flat plate collector with a 0.5 m² aperture, insulated 15 L hot-water store with a 500 W electric heater, circulating pump, temperature and flow sensors, readout and manual. 230 V AC, 50 Hz.
Note: Solar hot water heating trainer with a flat plate collector and an insulated 15 L store, manufactured by JaincoLab.
View Details
Solar Energy Hot Water System Trainer
Product Code : JA-LABCS-9622
Solar hot water trainer modelled on household and commercial solar water heaters: collector with an integral hot water storage tank and a 500 W thermostat-controlled electric backup heater, for thermosiphon and tank temperature experiments.
Note: Solar hot water heater trainer with an integral storage tank and a 500 W electric backup heater, manufactured by JaincoLab.
View Details
Solar Energy Demonstrator
Product Code : JA-LABCS-9623
Stand-alone PV trainer: 30 Wp nominal 12 V panel on a stand, fused 12 V 12 Ah sealed AGM battery, 10 A charge controller, 150 W pure sine inverter, DC and AC loads, voltage, current and power readings, guarded terminals, guide. Irradiance meter optional.
Note: Stand-alone solar PV demonstrator for solar cells, battery storage and DC to AC conversion, manufactured by JaincoLab.
View Details