Energy Saving Experiment Kit, Ready to Use
Product Code : JA-REE-7699
The Energy Saving Experiment Kit, Ready to Use, lets students measure how energy and water are used and wasted at school or at home. They log room temperature and humidity, carbon dioxide, light levels, surface temperatures, water flow and electricity use. They then work out savings that keep comfort, and link household use with global energy consumption and climate change.
Specifications of the energy saving experiment kit
| Product code | JA-REE-7699 |
|---|---|
| Kit type | Ready-to-use energy saving experiment kit in a fitted case |
| Base station and sensors | Base station with four temperature and humidity sensors* |
| Carbon dioxide | Carbon dioxide measuring station with adapter and SD card; SD card reader* |
| Light and surface temperature | Luxmeter; infrared thermometer* |
| Water and electricity | Water flowmeter; two energy meters* |
| Batteries | Eleven AA cells* |
| Case | Fitted case with inserts; transport size about 600 x 400 x 250 mm* |
| Student measurements | Room temperature; water and energy consumption |
| Topics covered | Energy use, wastage and saving; household and global energy consumption; climate change; ecological impact of energy choices |
| Manufacturer | JaincoLab, Ambala, India |
* Standard JaincoLab specification for new builds.
Energy saving experiments with the kit
- Lighting audit. Take a luxmeter reading at each desk with the lights on and again with daylight only. Mark the places where daylight is enough. A Digital Lux Meter lets a second group survey another room at the same time.
- Standby and plug loads. Run a computer, a projector or a charger through one of the energy meters. Note the power in use, on standby and switched off at the wall, then work out the energy lost to standby in a term.
- Heating, cooling and fresh air. Place the temperature and humidity sensors in different rooms and log them on the base station. Log carbon dioxide in a closed classroom, open the windows and record how fast it falls and how the room temperature changes.
- From saving to generating. After the audit, compare the savings found with the electricity a small panel makes on the Solar Cell Unit. Then look at a larger set-up on the Solar Energy, Photovoltaic, Wind Power System.
Frequently Asked Questions
How do students measure standby power with the energy meters?
Connect the appliance through one of the two energy meters. Read the power while it runs, then on standby, then with it switched off at the wall. Multiply the standby power by the hours it sits idle to estimate the energy it wastes in a week or a term.
What is the difference between watts and kilowatt-hours on an energy meter?
Watts give the power an appliance draws at that moment. Kilowatt-hours give the energy it uses over time, and that is what the electricity bill charges for. A lamp of one hundred watts left on for ten hours uses one kilowatt-hour.
Why does the carbon dioxide level rise in a closed classroom?
Everyone in the room breathes out carbon dioxide. With the doors and windows shut it builds up faster than fresh air replaces it. Students log the level, then open a window and watch it fall. In hot or cold weather this also shows the energy cost of airing a room.
How can a class run a lighting audit with the luxmeter?
Divide the room into a grid and take a luxmeter reading at each desk, first with the lights on and then with daylight only. Mark the spots that have enough daylight. Students then suggest which lights can be switched off, or which rows need a switch of their own.
What should a tender list as the contents of this energy saving kit?
List the base station with four temperature and humidity sensors, the carbon dioxide station with its adapter and SD card, and the SD card reader. Add the luxmeter, infrared thermometer, water flowmeter, two energy meters, eleven AA cells and the fitted case with inserts.
Can your team demonstrate the kit and train our teachers?
Yes. A JaincoLab team can demonstrate the experiments to your purchase committee or at your school, and walk teachers through each measurement. The instruments come with their manuals for staff. Ask for a demonstration when you send your enquiry through the contact page.
Other equipment in the renewable energy range
See the Renewable Energy Equipment range and more physics apparatus from JaincoLab, a physics lab equipment manufacturer in India.
For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.
