• +91-85699-09696

Integrated AM and FM Trainer

Integrated AM and FM Trainer

Product Code : JA-RATC-9593

The Integrated AM and FM Trainer joins a selectable AM/FM transmitter chain to a receiver chain over a terminated 50 ohm cable. No radiating antenna is used. Fixed 455 kHz and 10.7 MHz teaching IFs and metering test points let students follow a signal from carrier to audio. An isolated 12 V DC supply powers the units.

Specifications of the integrated AM and FM trainer

Product codeJA-RATC-9593
Signal chainsOne transmitter chain, selectable for AM or FM, and one receiver chain
LinkConducted classroom link terminated in 50 ohm; no external radiating antenna
Transmitter output0 dBm or less into 50 ohm
Intermediate frequencies455 kHz for AM and 10.7 MHz for FM, fixed teaching IFs, separate from the broadcast tuning bands
Circuit blocksCarrier, modulator and demodulator, gain and filter, detector and audio stages
Measurement accessMetering test points on the blocks
Power supply12 V DC, isolated
Supplied itemsSource unit, receiver unit, patch leads, terminators and a set of experiments
DocumentationManuals and experiment sheets for theory, operation, testing and troubleshooting
ManufacturerJaincoLab, Ambala, India

Link experiments on the integrated AM and FM trainer

  • Modulation depth on the link. Set an AM carrier, add a tone and view the transmitter output on the 30 MHz Oscilloscope. Measure Vmax and Vmin, then change the tone level and watch the envelope follow it.
  • IF stage check. With the link connected, inject a modulated 455 kHz signal from the 150 MHz RF Signal Generator at the AM IF test point. Compare the detector output with the one produced over the link.
  • FM against AM. Switch the chain to FM and compare the recovered audio with the results from the Frequency Modulation and Demodulation Trainer. Then lower the link level and note how each mode holds its audio.
  • Gain through the chain. Read the signal at each metering test point and work out the gain or loss of every block in dB. Add the figures and compare the total with the end-to-end result.

Frequently Asked Questions

How is the IF produced from the carrier and the local oscillator?
The mixer combines the incoming carrier with the local oscillator and gives their sum and difference. The IF filter passes only the difference, fixed here at 455 kHz for AM and 10.7 MHz for FM. Students can confirm this by reading the oscillator and carrier frequencies and subtracting one from the other.

Why does the detected audio distort when the tone frequency is raised?
The envelope detector's capacitor must discharge fast enough to follow the envelope down. If its time constant is too long for the tone and depth, the output lags and the audio is clipped on the falling slopes. A lower depth, a lower tone or a smaller time constant cures it.

Why does the trainer use a terminated 50 ohm link instead of an antenna?
A terminated cable keeps the transmitter power inside the link, so nothing radiates into the room and benches do not interfere with each other. The 50 ohm termination also lets students measure true output levels and the gain of each stage, which open-air reception would not allow.

What should students check before switching the trainer on?
Check that the patch lead joins the transmitter to the receiver and that every unused output carries its terminator. Set the modulation and gain controls to minimum, then connect the 12 V DC supply. Ask the teacher to check the wiring before power is applied.

Does the Integrated AM and FM Trainer need an import permit or type approval?
It contains a radio transmitter, even though it works only on a conducted link of 0 dBm or less with no radiating antenna. Radio transmitters usually need an import licence or type approval in the buyer's country, so check with your telecom regulator before ordering. Send us the regulator's questions and we will answer them from the specification.

Which details should we give the regulator or customs about this trainer?
Describe it as an AM/FM transmitter and receiver trainer with an output of 0 dBm or less into 50 ohm. State that it works only on a terminated cable link, with no external antenna. Quote the product code JA-RATC-9593 on every document, so the permit, invoice and packing list match.

Other trainers in the radio and telephone range

Companies bidding for Ministry of Education, World Bank or United Nations laboratory tenders can work with JaincoLab as their manufacturing partner: we make and export complete laboratory packages for such projects and have executed them successfully in many countries. Send the tender specification through our tenders page for a quotation.

See the Radio and Telephone Communications range and more electronics lab equipment from JaincoLab, an electronics lab equipment manufacturer in India.

For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.

Last updated: 20 November 2026

   
Supply of Integrated AM and FM Trainer from to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]

+91-85699-09696

Follow Us