Antenna System Demonstrator
Product Code : JA-RATC-9595
The Antenna System Demonstrator is a classroom antenna station with one signal path in a nominal 1 GHz band. Its source is capped at +3 dBm (2 mW) into 50 ohm. Students mount a dipole, monopole or Yagi on a stand graduated in degrees and measure polar patterns, gain and polarisation. A 10 GHz horn and slot-array extension is a separate option.
Specifications of the antenna system demonstrator
| Product code | JA-RATC-9595 |
|---|---|
| Operating band | Nominal 1 GHz, one signal path; source, receiver, connectors and antennas matched and calibrated for this band*. Earlier 700 MHz units keep their own frequency |
| Source output | Capped at +3 dBm (2 mW) into 50 ohm, for low-power indoor use |
| Antennas | Dipole, monopole and Yagi, plus a known reference antenna |
| Stand and test fixture | Rotating stand graduated in degrees, on a controlled indoor test fixture |
| Receiver and accessories | Detector with display, patch cables and a suitable power supply |
| Experiments | Polar pattern, gain by comparison with the reference antenna, and polarisation |
| 10 GHz option | Horn and slot-array microwave extension, ordered as a separate option* |
| Documentation | Student experiment manual with step-by-step guidance through antenna theory and practice |
| Operating note | Operate the station as the supplied manual describes and under the local radio rules that apply |
| Manufacturer | JaincoLab, Ambala, India |
* Standard JaincoLab specification for new builds.
Antenna experiments with the demonstrator
- Polar pattern of a dipole. Turn the stand a few degrees at a time and read the detector at each step. Plot the readings on polar paper and mark the half-power beamwidth.
- Gain by comparison. Measure the Yagi and then the reference antenna at the same distance and in the same position. The difference between the two readings, in dB, gives the Yagi's gain over the reference.
- Polarisation. Turn the receiving antenna from vertical to horizontal and watch the reading fall. Relate the result to the outdoor antennas of the TV Antenna Trainer, which must match the polarisation of the transmitter.
- Feed lines and higher frequencies. Study standing waves on the Transmission Line Trainer and relate them to the match of each antenna. Then move on to horns and waveguides with the Microwave Training System.
Frequently Asked Questions
Why does the antenna demonstrator work at 1 GHz?
At 1 GHz the wavelength is short enough for dipoles, monopoles and Yagis to be small, light and easy to turn on a bench stand. It is still long enough for the antennas to be handled and adjusted by hand. A whole pattern can be measured inside an ordinary classroom.
How do the directors and reflector of a Yagi give it gain?
Only the driven element is fed. The reflector behind it and the directors in front pick up and re-radiate the signal. Their phase shifts add in the forward direction and cancel towards the back. More directors narrow the beam and raise the gain, at the cost of a longer antenna.
Can a radiation pattern be measured in an ordinary classroom?
Yes, with care. Clear metal objects from the path and keep both antennas at the same height, well away from walls. Stand back from the stand while reading. Reflections still add ripples to the plot, so compare the overall shape of the pattern rather than every small dip.
Why is a reference antenna supplied with the demonstrator?
Gain cannot be read straight from a detector. Students measure the test antenna and the reference antenna in the same place. The difference between the two readings is the gain relative to the reference. Adding the known gain of the reference then gives the gain of the test antenna.
What is supplied with the antenna demonstrator when we order it?
The station comes with the 1 GHz source and the dipole, monopole, Yagi and reference antennas. It also includes the rotating stand, detector with display, patch cables, power supply and student manual. The 10 GHz horn and slot-array extension is ordered separately. Users follow the supplied manual and the local radio rules that apply.
Can your team demonstrate the antenna experiments to our staff?
Yes. A JaincoLab team can demonstrate the polar pattern, gain and polarisation experiments at your institution, and service engineers install the station. Tell us which room you plan to use, as the bench layout and nearby metal affect the readings.
Other trainers in the radio and telephone range
- CB Transceiver Trainer
- AM FM Radio Trainer
- Radio Communication Training System
- Integrated AM and FM Trainer
- Walkie Talkie Trainer
- Cellular Mobile Phone Trainer
See the Radio and Telephone Communications range and more electronics lab equipment from JaincoLab, an electronics lab equipment manufacturer in India.
For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.
