Illuminated Process Panel for Crude Palm Oil Production Simulation
Product Code : JA-DAIAPC-9615
This illuminated panel presents crude palm oil production on an A1-size colour diagram. LEDs under microprocessor control light the process stations in sequence, so students can follow the fruit and the oil through the mill. It makes the operation and layout of a palm oil plant easier to teach in a classroom. All heating and motion on the panel are simulated.
Specifications of the crude palm oil process panel
| Product code | JA-DAIAPC-9615 |
|---|---|
| Process shown | Crude palm oil production: fruit reception, sterilisation, threshing, digestion and pressing, clarification and oil storage, with a separate nut and fibre stream |
| Diagram | A1 size (594 x 841 mm), in colour |
| Animation | LEDs under microprocessor control light the stations one after another to show the material flow; alarm lights |
| Controls | Power, step/auto, start, stop and reset; electronic microcontroller system integrated with the diagram |
| Power supply | 24 V DC LEDs and control panel, fed from a 230 V AC, 50 Hz adapter |
| Mounting | Freestanding tabletop stand, with an optional wall fixture |
| Operation | Simulation only: heating and motion are shown by lights |
| Manufacturer | JaincoLab, Ambala, India |
Using the palm oil process panel in agro-processing classes
- Station walk-through. Run the LED sequence once in auto mode without comment. On the second run, switch to step mode and follow the fruit and the oil from station to station. At each lit station, ask students what enters it, what leaves it and why the step is needed.
- Free fatty acid test. Dissolve a weighed oil sample in neutralised alcohol and titrate it with dilute alkali from a Burette, using phenolphthalein as the indicator. Relate a high result to fruit handling and the delay before sterilisation.
- Moisture in the oil. Dry a small crude oil sample on the Infra Red Moisture Balance and note the moisture loss. Then find the drying stage on the diagram and explain why wet oil spoils faster.
- Clarification by settling. Leave a warm mixture of oil and water to stand in a Separating Funnel and watch the layers form. Compare this with the clarification station on the panel.
Frequently Asked Questions
How do you read the symbols and lines on a process flow panel?
Each main item of equipment, such as a steriliser, press or tank, is drawn as a symbol. Solid lines carry the main process flow, and arrows show its direction. A process flow diagram shows the main equipment only. A piping and instrumentation diagram adds every valve, instrument and control loop.
Why are fresh fruit bunches sterilised before the oil is pressed out?
Steam sterilisation stops the enzymes that split the oil into free fatty acids. It also loosens the fruit from the bunch for threshing and softens the flesh for digestion and pressing. Proteins coagulate as well, which helps the oil separate cleanly later.
In what order do the stations of a crude palm oil mill work?
Fruit bunches are received and graded, then sterilised with steam. The thresher strips the fruit from the bunches. The fruit is digested and pressed to release crude oil. The oil is then clarified, purified and dried before it goes to storage. The press cake goes to a separate stream, where the nuts and fibre are separated.
Why does a high free fatty acid level lower the quality of crude palm oil?
Free fatty acids form when the oil is split by water and enzymes, mostly in bruised or old fruit. A high level means more loss during refining and poorer keeping quality. Quick processing, gentle handling and proper sterilisation keep the level low.
Can the panel be supplied for our mains voltage and with our type of plug?
The standard panel runs its LEDs and controls on 24 V DC from a 230 V AC, 50 Hz adapter. JaincoLab makes apparatus to a buyer's own specification, so state your mains voltage, frequency and plug type in your enquiry through our contact page.
Can the labels and the manual be printed in our own language?
Ask for this in your enquiry. JaincoLab works to a buyer's own specification and can print a customer's logo on its models. Name the language you need for the station labels and the manual, and send the request through our contact page.
See the Data Acquisition, Instrumentation and Process Control range and more electronics lab equipment from JaincoLab, an electronics lab equipment manufacturer in India.
For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.
