Hip Implant Model
Product Code : JA-IM-320
The Hip Implant Model is a life-size, non-clinical teaching model of one hip replacement. It shows a pelvis with the acetabular section and the upper femur, joined by flexible artificial ligaments. The simulated implant is a modular femoral stem with a removable head, an acetabular shell and a separate liner. The model shows anteversion, retroversion, abduction and rotation.
Specifications of the hip implant model
| Product code | JA-IM-320 |
|---|---|
| Size | Life size |
| Bones shown | Pelvis with the acetabular section; proximal femur |
| Ligaments | Flexible, artificial |
| Implant (simulated, for teaching) | One hip replacement: modular femoral stem, femoral head, acetabular shell and liner |
| Removable parts | Femoral head, off the modular stem; liner, out of the acetabular shell |
| Movements | Anteversion; retroversion; abduction; internal and external rotation |
| Base and key | Included: one labelled base and a key |
| Use | Teaching model only, not a surgical implant |
| Manufacturer | JaincoLab, Ambala, India |
Teaching hip replacement with the implant model
- From healthy joint to implant. Start with the Hip Joint Model, then show the worn joint surfaces on the Hip Osteoarthritis Model before passing round the implant model.
- Naming the implant parts. Students take the femoral head off the stem and lift the liner out of the shell. They name each part and say which part of the joint it replaces.
- Movements after surgery. Move the femur through abduction and rotation on the model, and point out the positions that patients are taught to avoid in the first weeks.
- Hip and knee replacements compared. Set the model beside the Knee Implant Model and compare how each joint is rebuilt and what each implant part does.
Frequently Asked Questions
Which parts of a hip replacement does the model show?
It shows the four main parts of a total hip replacement. A modular stem sits in the femur and carries a removable head. In the pelvis, an acetabular shell holds a separate liner, and the head turns in the liner. All the parts are simulated teaching pieces, not real implants.
Why are the femoral head and the liner separate parts on the model?
Real hip implants are modular, so the surgeon can choose the head size and the liner to suit the patient. Only these parts need changing in a later revision. The model copies this design, so students can take the head off the stem and lift the liner out of the shell.
How can the model help explain why a new hip can dislocate?
Patients are taught to avoid deep bending combined with crossing and turning the leg in. That position levers the head against the rim of the liner. On the model, students use the internal rotation movement to point out where that lever acts and why the early weeks need care.
Can the model be used in pre-operative hip classes for patients?
Yes. Physiotherapists and nurses can show patients what the operation replaces and why some positions are avoided at first. Seeing the stem, head and liner helps patients follow the advice on bending, crossing the legs and turning the leg in.
What details should a tender give for this hip implant model?
State a life-size model with a pelvis and acetabular section, the upper femur and flexible ligaments. List the simulated implant parts: modular stem, removable head, acetabular shell and separate liner. Add the labelled base and key, and the movements the model shows.
Can our purchase committee see the model before the order is placed?
Yes. A sample can be sent with the quotation if required. The JaincoLab team can also demonstrate the model to your purchase committee or at your college. Ask for this when you send your enquiry through the contact page.
Other hip and implant models
See the Implant Models range and more teaching models from JaincoLab, an anatomical models manufacturer in India.
For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.
