Hip Replacement Stages Model, 4 Stages
Product Code : JA-OM-291
The Hip Replacement Stages Model shows hip implantation in four stages, in the order they happen. Each stage shows the condition of the joint structure at that point, so the whole sequence can be explained in one lesson. It is a teaching model for medical institutions, hospitals and colleges, and it is not a medical device.
Specifications of the hip replacement stages model
| Product code | JA-OM-291 |
|---|---|
| Type | Hip implantation stages model |
| Stages | 4, shown in sequence |
| Shows | Condition of the joint structure at each stage |
| Intended users | Medical institutions; hospitals; colleges |
| Use | Teaching model only, not a medical device |
| Manufacturer | JaincoLab, Ambala, India |
Teaching hip replacement with the stages model
- Stage by stage. Students take each stage in order and say what has changed in the joint since the stage before.
- Healthy, worn and replaced. Start with the Hip Joint Model and the Hip Osteoarthritis Model, then move through the four stages.
- The finished implant. End with the Hip Implant Model, where students take the head off the stem and lift the liner out of the shell.
- Nursing care at each step. Link the stages to the care that follows: pain relief, wound checks, early walking and the positions patients are taught to avoid.
Frequently Asked Questions
What happens at each main step of a hip replacement operation?
The surgeon opens the joint, dislocates it and removes the worn femoral head. The socket is reshaped and the cup and liner are fitted. The femur is prepared and the stem goes in. A trial ball is used to test movement before the final ball is fitted.
What is the difference between cemented and uncemented hip implants?
A cemented implant is fixed with bone cement, which holds it firmly straight away. An uncemented implant has a rough or coated surface that the bone grows into over the following weeks. The surgeon chooses between them by the age of the patient and the quality of the bone.
How does a total hip replacement differ from a partial one?
In a total hip replacement both the femoral head and the socket are replaced. In a partial replacement, or hemiarthroplasty, only the femoral head is replaced and the natural socket is kept. Partial replacement is often used for some hip fractures in older patients.
Why teach hip replacement in stages rather than only show the finished implant?
Seeing each stage helps learners follow what the surgeon removes, prepares and fits, and why recovery takes time. Nursing and physiotherapy students can then link each stage to the care that follows. A finished implant on its own does not show these steps.
What should a tender state for a hip replacement stages model?
State a four-stage hip implantation teaching model that shows the condition of the joint structure at each stage, for teaching use only. Add the quantity per department. Ask us for the size and the parts list of the current build when you enquire.
Is the hip stages model the same as the Hip Implant Model?
No. The Hip Implant Model shows one finished hip replacement with removable implant parts. This model shows hip implantation in four stages. Many colleges list both, so that students see the sequence and then handle the finished implant.
Other hip and implant models
See the Implant Models range and more teaching models from JaincoLab, an anatomical models manufacturer in India.
For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.
