• +91-85699-09696

Fire Alarm Trainer

Fire Alarm Trainer

Product Code : JA-LABCS-9625

The Fire Alarm Trainer introduces students and technicians to basic fire alarm systems. It lays the groundwork for installing and maintaining fire alarms in buildings. Learners wire detectors, call points and a sounder to a four-zone control panel. They then raise alarms and faults on the training bench and watch how the panel reports each one.

Specifications of the Fire Alarm Trainer

Product codeJA-LABCS-9625
Subject and learnersBasic fire alarm systems, for students and technicians
SkillsGroundwork for installing and maintaining fire alarm systems in buildings
Control panelConventional four-zone fire alarm control panel with alarm, fault and power indicators and control switches
DetectorsTwo optical smoke detectors and one heat detector
Manual call pointsTwo manual call points
Alarm signallingOne sounder and one visual alarm indicator
Power supply230 V AC, 50 Hz mains; 24 V DC field devices matched to the panel; backup battery, with mains and battery failure indicated
Construction and wiringComponents on a dedicated training bench, wired through terminals, with end-of-line parts for the zones
DocumentsTraining manual
ManufacturerJaincoLab, Ambala, India

Fire alarm practicals on the trainer

  • Zone and sounder circuits. Wire a smoke detector, the heat detector and a call point into one zone, and the sounder and visual alarm indicator into the sounder circuit. Check each loop with a Digital Multimeter before power-up.
  • Alarm and reset. Operate a call point with its test key, silence the sounder and reset the panel. Note which indicators light at each step.
  • Fault finding. Open the zone wiring at the last detector, then short it instead. Compare what the panel shows in each case and explain the difference.
  • Fire and security side by side. Set the trainer next to the Security Alarm Trainer and compare how each panel treats an open circuit in a zone.

Frequently Asked Questions

Which rooms need a heat detector rather than a smoke detector?
Use heat detectors in kitchens, garages, boiler rooms and dusty or steamy areas, where cooking fumes, exhaust or steam would set off a smoke detector. Elsewhere, smoke detectors are preferred, as they respond much earlier to a smouldering fire. Corridors and escape routes normally get smoke detectors.

How does a rate-of-rise heat detector differ from a fixed-temperature one?
A fixed-temperature detector alarms when the air around it reaches its set temperature. A rate-of-rise detector alarms when the temperature climbs quickly, even well below that point, so it catches a fast fire sooner. Many heat detectors combine both elements.

How does an addressable fire alarm differ from the zoned panel on the trainer?
On a conventional panel, several detectors share one zone circuit, so the panel shows only which zone is in alarm. On an addressable system, each device has its own address on a loop, and the panel names the exact detector. Addressable systems suit large buildings.

How should students test smoke and heat detectors without damaging them?
Use a test aerosol made for smoke detectors, in short bursts from the distance given on the can. Never spray it straight into the detector at close range. Test heat detectors with a proper heat tester, never with a naked flame, and let each detector clear before resetting the panel.

Which tests should be shown on the fire alarm trainer at handover?
Ask to see an alarm from each detector and call point, and a sounder test. Then ask for open and short circuit faults on the zone and sounder wiring, a mains failure and a battery disconnection. JaincoLab service engineers install the trainer and can run these tests with your staff at your site.

Should our tender ask for battery backup and fault indication on the trainer?
Yes. Ask for a backup battery, 24 V DC field devices matched to the panel, and indicators that show mains failure, battery failure and wiring faults. These let students practise the power and fault tests that a real system needs. Send the tender schedule through our tenders page.

Other building control trainers in the range

Companies bidding for Ministry of Education, World Bank or United Nations laboratory tenders can work with JaincoLab as their manufacturing partner: we make and export complete laboratory packages for such projects and have executed them successfully in many countries. Send the tender specification through our tenders page for a quotation.

See the Lighting and Building Control Systems range and more electronics lab equipment from JaincoLab, an electronics lab equipment manufacturer in India.

For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.

Last updated: 20 November 2026

   
Supply of Fire Alarm Trainer from to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]

+91-85699-09696

Follow Us