3D Solids Set
Product Code : JA-G-3520
The 3D Solids Set has 17 transparent plastic solids with teaching notes, small enough for a group to handle on a desk. Pupils investigate faces, edges, vertices, curves and angles on each solid. In the standard build every solid has a nominal longest dimension of 50 mm.
Specifications of the small 3D solids set
| Product code | JA-G-3520 |
|---|---|
| Pieces | 17 transparent plastic solids |
| Shapes named on the listing | Cone, sphere, hemisphere, cube, cylinder, rectangular prism, hexagonal prism, triangular prism and square pyramid |
| Other eight shapes (standard completion) | Pentagonal prism, octagonal prism, triangular pyramid, rectangular pyramid, pentagonal pyramid, hexagonal pyramid, truncated cone and ellipsoid* |
| Size | Nominal longest dimension 50 mm* |
| Material | Transparent plastic |
| Included | Teaching notes |
| Manufacturer | JaincoLab, Ambala, India |
* Standard JaincoLab specification for new builds.
Group work with the small transparent solids
- Sort the set. Groups sort the solids into those with curved surfaces and those with flat faces only, then name each one.
- Euler check. For every flat-faced solid, pupils count faces, vertices and edges and test the rule faces plus vertices minus edges.
- Build and compare. A group builds the skeleton of a prism with the Vertex Wonder set and compares it with the solid.
- Class link. The teacher shows the same shape from the larger 3D Solids set at the front while groups hold the small one.
Frequently Asked Questions
Why do pupils find it hard to draw a 3D solid on paper?
A drawing has to show depth on a flat page, so hidden edges and slanted faces cause trouble. Holding a small transparent solid helps, because pupils can see every edge while they draw. Dotted lines for hidden edges are a good next step.
How can pupils check Euler's rule with the solids?
For each solid with flat faces, count the faces, the vertices and the edges. Faces plus vertices minus edges gives two every time. Solids with curved surfaces, such as the cone and the sphere, do not follow the rule, which is worth discussing.
What can older pupils do with a set of solids beyond naming them?
They sort the solids by faces, edges and vertices, compare cross-sections and match each solid to its net. The set also supports surface area and volume work, for example comparing a cone and a cylinder on the same base.
Is the 5 cm set the same as the larger 3D Solids set?
In the standard build it has the same seventeen shapes in transparent plastic, at a nominal longest dimension of 50 mm instead of 100 mm. The smaller set suits group work on desks, and the larger set suits teacher demonstrations.
Which classes use the small 3D solids set?
Primary and middle school groups use it to name and sort solids. Secondary classes use it for faces, edges, vertices and Euler's rule. A group of four or five pupils can share one set.
Other solids and nets in the Geometry range
See the Geometry range and more maths teaching aids from JaincoLab, a maths lab equipment manufacturer in India.
For a quotation, send the product name and the quantity you need through our contact page. For tender or project supply, see our tenders page.
