Oxygen Flow Meter 0 – 15 LPM Manufacturer,Supplier and Exporter in India

Product Code : JL-RAAE-10815

Jaincolab Medical gas flow meter to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 15 LPM, for medical oxygen.

Graduation shall have over 270 degrees of visibility.
Needle valve and body constructed of brass or aluminium.
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Can be cleaned with damp cloth and a disinfection solution.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Pressure compensated design to give specified accuracy for whole range of input pressures
Maximum flow rate when fully opened: 50 L/min 
Adjustment knobs to have rough surface to prevent slipping.
Built-in inlet filter 

0 - 15 L/min, accuracy 10%, tube gradation max 0.5 L/min at low flow, max 1 L/min high flow

    Download as Pdf  

Office Address

Jain Scientific Suppliers
2475-84, Hargolal Road,
Ambala Cantt, Haryana, India

[email protected]


Follow Us